Deutsch
English
Francais
Español
Italiano
Nederlands
Polski
The XXL Jumbo Pack Filament Set with 10x filament 0.5 kg rolls. A starter set with the most popular PLA filament colours and the new SILK PLA filaments copper and silver.
The Bresser PLA filament material is manufactured with a diameter tolerance of ± 0,2 mm which allows the use not only for the Bresser 3D printer but also for any other brand of printer supporting PLA material with a diameter of 1,75 mm.
The material is strictly monitored during the manufacturing process to eliminate even the smallest impurities and therefore you get the always consistent results for which we stand. For optimal processing of the PLA and SILK PLA material during printing we recommend an extruder processing temperature between 200 and 220 degrees C. The optimum printing speed is between 60 and 90 mm/s. We recommend heating the building platform to 40-50 degrees if possible.
Properties of PLA:
The material is strictly monitored during the manufacturing process to eliminate even the smallest impurities and therefore you get the always consistent results for which we stand. For optimal processing of the PLA and SILK PLA material during printing we recommend an extruder processing temperature between 200 and 220 degrees C. The optimum printing speed is between 60 and 90 mm/s. We recommend heating the building platform to 40-50 degrees if possible.
Properties of PLA:
- Biodegradable
- Low melting point
- Odourless
- Please make sure that you do not expose the filament to temperatures above 50° C
- 2x PLA Filament black
- 2x PLA filament white
- 1x PLA filament green
- 1x PLA filament blue
- 1x PLA Filament red
- 1x PLA filament neutral
- 1x SILK PLA filament copper
- 1x SILK PLA filament silver
Technical Data
| ELECTRONICS, HARDWARE & SOFTWARE | |
|---|---|
| Print speed (mm/s) from | 60 |
| Nozzle temperature (°C) | 200 |
| Filament diameter | 1.75 mm |
| Nozzle speed (mm/s) up to | 90 |
| GENERAL TECHNICAL DATA | |
| Temperature range min. (°C) | 200 |
| Temperature range max. (°C) | 220 |
| Extended warranty | 5 years |
Technical Data
| ELECTRONICS, HARDWARE & SOFTWARE | |
|---|---|
| Print speed (mm/s) from | 60 |
| Nozzle temperature (°C) | 200 |
| Filament diameter | 1.75 mm |
| Nozzle speed (mm/s) up to | 90 |
| GENERAL TECHNICAL DATA | |
| Temperature range min. (°C) | 200 |
| Temperature range max. (°C) | 220 |
| Extended warranty | 5 years |
