The BRESSER-BRM-300AM is a very compact and powerful studio flash with a variably adjustable lightning power of 1/32 up to a full power of 300 watts per second.
This flash has a Bowens-S bayonet connector, so you can use a lot of standard accessories from BRESSER with the BRM-300AM. Thanks to the fast recharge time of 0.5 to 1.0 seconds, the flash is ready for use immediately. The housing is very robust and the 150W halogen lamp can be switched on and off.
The rear of the BRM-300AM is equipped with a clear user interface and a special protection ensures that the flash does not overheat even in long-term use. The settings can be easily and quickly adjusted using the control buttons. The BRESSER-BRM-300AM studio flash is suitable for product and portrait photography.
FEATURES
SCOPE OF DELIVERY
SPECIFICATIONS
This flash has a Bowens-S bayonet connector, so you can use a lot of standard accessories from BRESSER with the BRM-300AM. Thanks to the fast recharge time of 0.5 to 1.0 seconds, the flash is ready for use immediately. The housing is very robust and the 150W halogen lamp can be switched on and off.
The rear of the BRM-300AM is equipped with a clear user interface and a special protection ensures that the flash does not overheat even in long-term use. The settings can be easily and quickly adjusted using the control buttons. The BRESSER-BRM-300AM studio flash is suitable for product and portrait photography.
FEATURES
- Flash output of 300 watts per second
- Adjustable from 1/32 to full power
- Charging time from 0.5 to 1.0 second
- 150W halogen setting lamp - fully on or off
- Color temperature: 5300-5600K
- Bowens-S bayonet connection
- Comprehensive user interface
- overheating protection
SCOPE OF DELIVERY
- 3x studio flash BRESSER BRM-300AM
- 3x tripod 200cm
- 3x Softbox 60x90cm
- 1x flash sync cable
- 3x adjustment lamp 150W
- 3x flash tube 300W
- 3x power cable
- 3x replacement fuse
SPECIFICATIONS
- Model: BRM-300AM
- Power: 300WS
- Guide number: GN56
- Charging time: 0.5 - 1.0 seconds
- Power range: 6 steps (1/32 - 1/1)
- Setting lamp: halogen, 150W
- Flash tube: JDD-7 300WS
- Color temperature: 5600K
- Range Photo Cell: about 10 meters
- Flash duration: 1/1000 - 1/2000 second
- Overheating protection: Yes
- Cooling: Yes
- Operating voltage: AC 220V - 240V @ 50Hz
- Fuse: T8 / 250V microfuse (5x20mm), 6.3A
- Warranty: 2 years
Technical Data
ELECTRONICS, HARDWARE & SOFTWARE | |
---|---|
Light source replaceable | ✓ |
GENERAL TECHNICAL DATA | |
Number of articles | 3 |
Colour | black |
Material | Aluminium |
Product series | BRM series |
Technical Data
ELECTRONICS, HARDWARE & SOFTWARE | |
---|---|
Light source replaceable | ✓ |
GENERAL TECHNICAL DATA | |
Number of articles | 3 |
Colour | black |
Material | Aluminium |
Product series | BRM series |