The high quality studio flashes of the BRESSER FM series were designed for studio photography. They impress with high stability and reliability and therefore meet the needs of any photographer. The flashes are available in various performance classes. In addition, a variety of suitable accessories are available to meet specific lighting requirements.
The integrated Sony microprocessor creates a reliable and constant power output. At the back is a comfortable and large LCD display(4x6,5cm) on which you can fast and easily enter the settings for the studio flashes and modelling lamp. With the help of the optional remote control it is also possible to regulate these values up to a distance of 50 m (especially handy if the studio flashes are a bit higher or far apart from each other - then you don't have to do a lot of running).
With the help of an optional hand control, 198 studio flashes can be operated. The integrated slave makes the studio flashes trigger automatically on the 1st, 2nd or 3th flash of your camera! Thanks to the strong "twist-click" bayonet connection at the front of the studio flashes, the largest available accessories fit to this flash device. It is suitable for amateur as well as for professional photographes and used forschool, product and portrait photography. Stylish and suitable rubberized metal housing.
The USB interface on the studio flash is only suitable for BRESSER WT-3 triggers and receivers. Please do not charge or connect any other technical devices to the studio flash!
FEATURES
The integrated Sony microprocessor creates a reliable and constant power output. At the back is a comfortable and large LCD display(4x6,5cm) on which you can fast and easily enter the settings for the studio flashes and modelling lamp. With the help of the optional remote control it is also possible to regulate these values up to a distance of 50 m (especially handy if the studio flashes are a bit higher or far apart from each other - then you don't have to do a lot of running).
With the help of an optional hand control, 198 studio flashes can be operated. The integrated slave makes the studio flashes trigger automatically on the 1st, 2nd or 3th flash of your camera! Thanks to the strong "twist-click" bayonet connection at the front of the studio flashes, the largest available accessories fit to this flash device. It is suitable for amateur as well as for professional photographes and used forschool, product and portrait photography. Stylish and suitable rubberized metal housing.
The USB interface on the studio flash is only suitable for BRESSER WT-3 triggers and receivers. Please do not charge or connect any other technical devices to the studio flash!
FEATURES
- High speed flash lamp
- Precise flash power settings from 1/1 to 1/64 over 7 f-stop values; 1/10 energy variable; guide number (GN) 87;
- Modeling lamp with white LED light (brightness equivalent to a 150W modeling lamp) and digital dimmer (PWM); energy-saving and durable due to lower surface temperature
- Large LCD panel with digital program control, power-on indicator, guide numbering (GN), overheating and over-voltage function
- Condenser temperature measurement inside, overheat protection, switchable fan
- UV protection cover
- Bowens compatible bayonet; light modifiers interchangeable easily with one hand; novel design with retractable handle
- Built-in USB-A port for connecting a WT-3 remote control; control of brightness and flash trigger via WT-3 remote control (range: about 50m in open area)
- Studio flash
- Protection cap
- Flash tube (pre-installed)
- Sync cord
- Power cord
- Spare fuse
- SMD LED (pre-installed)
- Instruction manual
Dati Tecnici
Campo di applicazione | |
---|---|
Campo di applicazione |
|
ELETTRONICA, HARDWARE & SOFTWARE | |
Alimentazione1 | Alimentatore integrato AC 180V-250V (50Hz) o 100V-200V (60Hz) |
C13/Euro | |
1/64 | |
1/1 | |
1/10000 | |
1/800 | |
0,1 - 1,5 | |
|
|
Interfacce |
|
DATI TECNICI GENERALI | |
Materiale di alloggiamento | Metallo/plastica |
Raccordo | Baionetta S (Bowens) |
Raggio di temperatura min. (°C) | 0 |
Raggio di temperatura max. (°C) | 35 |
Serie di prodotti | Serie FM |
DIMENSIONI & PESI | |
Lunghezza totale | 380 mm |
Larghezza totale | 140 mm |
Altezza totale | 250 mm |
Peso netto Elemento più pesante (accessori inclusi) | 3.25 kg |
Peso netto (senza accessori) | 3800 g |
Dati Tecnici
Campo di applicazione | |
---|---|
Campo di applicazione |
|
ELETTRONICA, HARDWARE & SOFTWARE | |
Alimentazione1 | Alimentatore integrato AC 180V-250V (50Hz) o 100V-200V (60Hz) |
C13/Euro | |
1/64 | |
1/1 | |
1/10000 | |
1/800 | |
0,1 - 1,5 | |
|
|
Interfacce |
|
DATI TECNICI GENERALI | |
Materiale di alloggiamento | Metallo/plastica |
Raccordo | Baionetta S (Bowens) |
Raggio di temperatura min. (°C) | 0 |
Raggio di temperatura max. (°C) | 35 |
Serie di prodotti | Serie FM |
DIMENSIONI & PESI | |
Lunghezza totale | 380 mm |
Larghezza totale | 140 mm |
Altezza totale | 250 mm |
Peso netto Elemento più pesante (accessori inclusi) | 3.25 kg |
Peso netto (senza accessori) | 3800 g |