BRESSER Studio Flash CM-500 with Touchscreen

This BRESSER flash of the CM-series is a professional studio flash with a variable adjustable modelling lamp, which is independently of the flash, continuously full light, on/off or proportional controllable. The integrated Sony microprocessor creates a reliable and constant power output. At the back is a comfortable and large touch screen (6x8cm) on which you can fast and easily enter the settings for the studio flashes and modelling lamp. With the help of the optional remote control it is also possible to regulate these values up to a distance of 20m (especially handy if the studio flashes are a bit higher or far apart from each other - then you don't always have to do a lot of running). With the help of the hand control, eight studio flashes can be operated. The integrated slave creates automatically more flashes, if necessary. It can be set on the 1st, 2nd or 3th flash of your camera! Thanks to the strong "twist-click" bayonet connection at the front of the flash, the largest available accessories fit to this flash. It is suitable for amateur as well as for professional photographes and used for school, product and portrait photography. Stylish and suitable rubberized metal housing. Optional, you can operate the CM-400 with a remote controller!
With a remote controller you are able to operate up to 8 studio flashs like the change of the energy level of the flash and the switching on of the modelling lamp! Advantages:

• Clear and very large LCD touchscreen control panel
• Easy operation
• Variable adjustable flash output (1/32 to 1/1)
• Mortise flashtube, easily replaceable
  
• Modelling lamp seperately adjustable
• Intelligent cooling system
• Overheating protection during prolonged use
• Fast recharge time (1-2 sec.)
• Synchronization over long distance (up to 20 meters)
• Strong (Bowens) S-Bayonet Connection for accessories
• Strong tilt head with tripod connection and opening for screen
• Suitable body for sustainable use
• Automatic Slave Flash at the 1st,2nd or 3th preflash of the camera flash
• Suitabe for many effect accessories
  

Scope of delievery:

• Studio flash CM-500
• Protection cap (for transport)
• Synchronic flash cable
• 150W modelling lamp
• flash pipe
• Tilt head with tripod connection
• Power cable
• (Exclusive metal reflector)
  

Specifications:

• Flash output: 500 Watt sec.
• Operation: Via large LCD screen
• Adjustable flash output: Variable, 1/32-1/1
• Recharge time: 1-2 sec.
• Power modelling lamp: 150 Watt
• Guide number: GN74
• Engine cooling: Yes
• Overheating protection: Yes
• Color temperature: 5300-5600K
• Flash duration: 1/800s-1/1500s
• Volt synchronic cable: 5V
• Length synchronic cable: 5 meter
• Main supply: 220V and 50Hz
• Flash relaxation possibilities: Test button, flash cable, slave, receiver and remote control
• Photocell: Reception up to 20 meters
• Connection accessories: S-Bayonet (suitably i.a. Bowens)
• Weight: 3 kg
  
• Size casing: 27 x 12 x 12 cm
• Size transport: 41 x 12 x 20 cm (including handle + protection cap + tripod connection)