BRESSER T-13 Spare or Additional Receiver
BRESSER T-13 Spare or Additional ReceiverSingle receiver as a replacement or extension for the BRESSER T-13 radio controlled trigger set.
The receiver is operated by 2 AAA batteries (not included). The receiver is connected to the studio flash with a cable with 3.5 mm jack plug. Suitable for almost all studio flashes.
Severeal receivers can be connected to one sender! When a studio flash is triggered with this set then all other studio flashes near by with an integrated slave will trigger automatically. If a flash has no slave or if it doesn't trigger due to its positioning you can buy an additional receiver to make 100% sure that all studio flashes trigger simultaneously.
In short, it's an accessory you don't want to miss in your studio.
Do not tumble anymore over annoying cables!
- single receiver
- 8 channels
- connection via jack plug
- 1x receiver
- jack plug adapter
|ELECTRONICS, HARDWARE & SOFTWARE|
|Batteries needed2||2x AAA (Micro), 1.5V|
|GENERAL TECHNICAL DATA|
|DIMENSIONS & WEIGHTS|
|Total length||75 mm|
|Total width||30 mm|
|Total height||20 mm|
|Net weight (without access.)||40 g|